Chemsol Korean Co., Ltd

By Product > GT > Plastic에 속한 제품리스트
Name	Description
PMMA Resin	PMMA - [Poly(methylmethacrylate)]
PEI Off Grade	PEI is an amorphous high-performance thermoplastic, and is a resin of combination of imide bonds that impart excellent heat resistance and strength and ether bonds that exhibit good processability. Maintain mechanical strength even at high temperatures.
PET off grade	PET is a milky white or light yellow, highly crystalline polymer with a smooth and shiny surface. It has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation is excellent. Even at high temperature and high frequency, its electrical properties are still good, but the corona resistance is poor. Creep resistance, fatigue resistance, friction resistance, and dimensional stability are all very good.
Ms off grade	Ms off grade
ABS off grade-non glossy	ABS off grade-non glossy
SAN	Overseas export and domestic sales are available.
PS (polystyrene)	It sinks slowly into the water. When burned, it produces a yellow flame, a strong smell, and a lot of smoke and charcoal. The molded article is soft, and when it falls on a hard surface, it gives a metallic sound. It is rarely cut with a knife and dissolved in carbon tetrachloride. As a homopolymer of styrene, it is colorless and clear, and the visible light transmittance is after the methacrylic resin, and is the same as that of large glass. The tensile strength and elastic modulus are at the top of the thermoplastic resin, but the impact strength is low. The electrical properties are excellent and are among the best in plastic. Due to its weak light resistance, it turns yellow and weakens under direct sunlight, but a light-resistant grade that combines ultraviolet absorbers and antioxidants has a great advantage in practical use. It is soluble in aromatic or chlorinated hydrocarbons, ketones, esters, etc., but is excellent in water resistance, acid resistance, and alkali resistance. In addition, since the pyrolysis temperature is high, thermal stability and fluidity when melting are excellent, it is excellent in molding processability and particularly, easy injection molding. The molding is mainly dependent on injection molding, but the molding shrinkage is small, and the size stability and surface gloss of the molded product are excellent. The uses are largely divided into miscellaneous goods such as various containers, household goods, toys, and office supplies, and industrial purposes such as various light electrical equipment parts and housing. - Usage: Instant cup, tableware, toothbrush, office supplies, electric device case, pipe, insulation holder, paint, ion exchange resin, packing material for packaging, insulation material, foam polystyrene, milk container, yogurt bottle, toy bottle, synthetic wood
PE (POLYETHYLENE)	It floats well in water, and is easy to cut. It is hardly soluble in a conventional solvent, but soluble in hot benzene or toluene. It ignites easily and burns rapidly, and when burned, charcoal falls and smells of wax or paraffin burning. The flame is blue, and the outside is yellowish. Polyethylene has excellent properties such as chemical stability, weather resistance, water resistance, low temperature resistance, impact resistance, insulation, and formability as well as common properties for plastics such as "light", "non-rusty", and "non-rotten". It is also the lightest plastic. As described above, it is used in a wide range of applications, from industrial materials to daily miscellaneous goods. 1. characteristic - Polyethylene is light, flexible, chemical resistance and excellent strength, and also has good insulation and processability. It is widely used in packaging materials, household goods, and building materials. - The chemical formula for PE is...-CH2-CH2-...It is a polymer material in which ethylene units are repeated. - The molecular structure of PE may be linear according to the polymerization method or may take the form of a branched polymer. Depending on the density of the polymer, it may be classified into high density PE (HDPE), linear low density PE (LLDPE), and low density PE (LDPE). - It is divided into HDPE［high density polyethylene ］ ⇒ (high density polyethylene=hard polyethylene) and LDPE［ low density polyethylene ］⇒(low density polyethylene=soft polyethylene) - conform to the Food Sanitation Act. It has excellent physical properties even under low temperatures. 2. Purpose 1) HD-PE (High density polyethylene) : Shampoo container, kerosene can, detergent container, city gas pipe, water pipe, Fishing boat ropes, fishing nets, beer containers, motorcycle , etc 2) LD-PE (Low density polyethylene) : Food packaging, garbage bag, agricultural film, mayonnaise/ketchup container, agricultural pipe, bottle cap, food seal container, internal cladding, etc.
PES(聚醚砜)	It sinks into the water at a high density (1.37). Since it is an amorphous resin, a transparent molded article, a light yellow color, is obtained. The molded article is strong and has a very high softening point, and has a Vicart softening point higher than 220°C. When placed in a flame, the molded product does not burn easily, but when burned, the molded product burns while emitting a white flame to emit the smell of sulfur. When a molded article hits a solid one, it makes a metal or a bell sound.
PET (PolyEthylene Terephthalate)	It is optimal for parts requiring fixed density .It has high mechanical strength and dimensional stability, and excellent wear resistance. It is a high-performance plastic with numerous characteristics and already has a lot of experience in the machinery parts field overseas. 1. characteristic 1) Continuous use temperature=80℃ 2) Magnetic stress : It has high compressive strength and excellent creep resistance. 3) Dimensional Stability: Low absorption, small linear expansion coefficient. 4) Friction and abrasion characteristics : Low coefficient of friction, stable/excellent Wear resistance. 5) Electrical properties : High withstand voltage 6) Acid resistance : Do not use it for alkali. 2. Purpose - food processing machine - Packing machine - the field of electricity and electronics
PP(Polypropylene)	1. Method of distinguishing - Float in water with a density of 0.9g/㎠. During combustion, it burns easily with a blue flame with yellow at the tip. And it smells like candles when it burns. Stay away from the flame and it will continue to keep burning. Although there is little smoke generation, the molded parts are hard and have a candle-like texture. It doesn't break easily unless you cut it. 2. characteristic - It has the smallest specific gravity among plastics The properties of PP (polypropylene) are similar to those of PE (polyethylene), but the like is superior to those of PE (polyethylene).
PA(nylon)	PA6 is less dense than PA66. (1.15g/㎠ 1.13g/㎠). So everything sinks into the water. In addition, it is opaque and rigid, so it is easily cut as a hard material, resulting in a natural terminal cutting hole. It is difficult to ignite and once burned, it loses its self-extinguishing properties. The flame burns blue, and the area around it is yellow, giving off the smell of hair burning hair.
PEEK(polyether · ether · ketone)	PEEK has the highest heat resistance (continuous use temperature of 250°C) among crystalline resins that can be dissolved and molded. Mechanical properties are extremely strong materials with high elongation and excellent impact resistance along with rigidity. characteristic - Continuous use temperature= 250℃ - It is suitable for continuous use under high temperature. - exceptionally good chemical resistance. - Excellent mechanical properties over a wide range of temperatures. - Excellent electrical features, weather resistance.
HDPE(High Density Polyethylene)	High-density polyethylene (HDPE, LUTENE-H) produced by LG Chem is produced by the world's first commercialized low-pressure manufacturing method by Hoechst. In addition, it provides production technology to the U.S., Japan, and other countries, and is widely recognized around the world for its excellent processability, excellent quality, and advanced products due to its constant R&D results. LG Chem's high density polyethylene is a shock-resistant and high-rigid product with excellent chemical resistance, environmental stress cracking (ESCR), and electrical characteristics, so it is used for various purposes such as film, hollow molding, injection, and pipe. In addition, it succeeded in commercializing metallocene polyethylene (mPE), the next-generation polyethylene, for the first time in Korea, and was recognized for its world-class technology by making its own catalyst and using the existing HDPE Line.
EVA(ethylene-vinylalcohol copolymer)	The resin obtained by saponifying the ethylene-vinyl acetate copolymer has a hydroxyl group in the molecule, and this is a factor characterizing the properties of the resin. It also has excellent organic solvent properties.
PP(polypropylene)	Polymers obtained by polymerizing propylene have a molecular weight of about 40,000 or more and are commercially available, have a density of 0.90, and are relatively excellent in tensile strength and heat resistance. Most of the properties are similar to those of polyethylene, but it resists stress cracks well and has excellent transparency. Materials copolymerized with other monomers, blended with polyisobutylene, etc., and materials containing asbestos or glass fiber to improve impact resistance are also commercially available, and are used for industrial use of automobile parts, various containers, films, etc. .
PC(polycarbonate)	1. method of distinguishing - It has a density of 1.2g/cm2 and sinks in water. It burns with a blue flame, but it doesn't burn easily. And the molding is carbonized and soon foamed. If the flame is removed, the combustion will not continue. And it produces a slight smell of phenol. - It has excellent electrical properties, so it does not change by temperature and frequency, and is not affected by moisture because of its low absorption rate. Scientific properties are stable in alcohol, oil, weak acids, etc. 2. characteristic 1) Impact Resistance, : More than 250 times the impact strength of ordinary glass. 2) Dimensional Stability : Be hardly affected by temperature or moisture. 3) Weather Resistance : Excellent ultraviolet resistance keeps high physical properties for a long time. 4) Excellent electrical properties over a wide temperature range. 5) Since electrical properties do not change over a wide temperature range, they are excellent as insulating materials. 3. Purpose - Communication, information, and OA devices (cell phones, copier parts) - Precision instruments (camera parts, wristwatch internal instrument parts) - Optical related (compact disc, Optic fiber) - Sound and home electricity (Iron, CD Player) - Electronic devices (connectors, fuse tubes, IC trays) - Automotive (panel, interior lamp, tail lamp) - Sports (ski goggles, golf club head, karate defense equipment)
ABS resin (acrylonitrile-butadiene-styrene resin)	1. method of distinguishing - It is cut cleanly with a knife, and the cut surface is smooth When burned, yellow charcoal produces a lot of sparks and emits an acidic smell that smells like rubber. It has a density of 1.05g/㎠and sinks slowly in the water. - ABS is an amorphous styrene-based thermoplastic resin with excellent balance such as impact resistance, rigidity, and flow, and is also characterized by excellent dimensional stability and molding processability. - The ABS resin has excellent impact resistance over a wide temperature range and also has excellent tensile strength, rigidity, and heat resistance. In addition, due to its excellent electrical properties, oil resistance, chemical resistance, and contamination resistance, all molding methods such as injection, extrusion, and calender processing are applied, and molding shrinkage is small. - The molded product has beautiful gloss, excellent dimensional stability, and creep resistance. In addition, secondary processing such as vacuum molding, painting, and metal plating is also easy. 2. characteristic - It has excellent shock resistance and rigidity - The secondary processing is easy. - Easy processing such as cutting and drilling. - Easy to attach tapping, insert, glue, etc. - It has a good surface appearance. - Acrylic: Excellent mechanical performance and heat resistance. - Since it is a rubber component, it has excellent impact resistance. - Stylene : Its formability and electrical properties are also excellent. 3. Purpose 1) Miscellaneous goods: stationery, toys, tableware, toilet, etc., 2) Interior ·exterior 3) Others: suit case, briefcase, sports equipment, furniture, musical instruments, etc
PPS	The molded product has a density of 1.5 ~ 2.1 g/㎠, which is greater than 1g/㎠, so it sinks quickly in water. High density materials contain mineral fillers in glass fibers. The molded article is rigid and does not cut easily with a knife. In addition, since this resin has its own non-combustibility, it does not burn well. It needs to reach a temperature of 540°C to light the molded product. When heated in a strong flame, it carbonizes and swells up with a smell of sulfur.

By Product > GT > Plastic에 속한 제품리스트

Name

Description

PMMA Resin

PMMA - [Poly(methylmethacrylate)]

PEI Off Grade

PEI is an amorphous high-performance thermoplastic, and is a resin of combination of imide bonds that impart excellent heat resistance and strength and ether bonds that exhibit good processability.
Maintain mechanical strength even at high temperatures.

PET off grade

PET is a milky white or light yellow, highly crystalline polymer with a smooth and shiny surface. It has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation is excellent. Even at high temperature and high frequency, its electrical properties are still good, but the corona resistance is poor. Creep resistance, fatigue resistance, friction resistance, and dimensional stability are all very good.

Ms off grade

ABS off grade-non glossy

SAN

Overseas export and domestic sales are available.

PS (polystyrene)

It sinks slowly into the water. When burned, it produces a yellow flame, a strong smell, and a lot of smoke and charcoal.
The molded article is soft, and when it falls on a hard surface, it gives a metallic sound.
It is rarely cut with a knife and dissolved in carbon tetrachloride.
As a homopolymer of styrene, it is colorless and clear, and the visible light transmittance is after the methacrylic resin, and is the same as that of large glass.
The tensile strength and elastic modulus are at the top of the thermoplastic resin, but the impact strength is low.
The electrical properties are excellent and are among the best in plastic.
Due to its weak light resistance, it turns yellow and weakens under direct sunlight, but a light-resistant grade that combines ultraviolet absorbers and antioxidants has a great advantage in practical use.
It is soluble in aromatic or chlorinated hydrocarbons, ketones, esters, etc., but is excellent in water resistance, acid resistance, and alkali resistance.
In addition, since the pyrolysis temperature is high, thermal stability and fluidity when melting are excellent, it is excellent in molding processability and particularly, easy injection molding.
The molding is mainly dependent on injection molding, but the molding shrinkage is small, and the size stability and surface gloss of the molded product are excellent.
The uses are largely divided into miscellaneous goods such as various containers, household goods, toys, and office supplies, and industrial purposes such as various light electrical equipment parts and housing.

- Usage: Instant cup, tableware, toothbrush, office supplies, electric device case, pipe, insulation holder, paint, ion exchange resin, packing material for packaging, insulation material, foam polystyrene, milk container, yogurt bottle, toy bottle, synthetic wood

PE (POLYETHYLENE)

It floats well in water, and is easy to cut.
It is hardly soluble in a conventional solvent, but soluble in hot benzene or toluene.
It ignites easily and burns rapidly, and when burned, charcoal falls and smells of wax or paraffin burning.
The flame is blue, and the outside is yellowish.
Polyethylene has excellent properties such as chemical stability, weather resistance, water resistance, low temperature resistance, impact resistance, insulation, and formability as well as common properties for plastics such as "light", "non-rusty", and "non-rotten". It is also the lightest plastic.
As described above, it is used in a wide range of applications, from industrial materials to daily miscellaneous goods.

1. characteristic
- Polyethylene is light, flexible, chemical resistance and excellent strength, and also has good insulation and processability. It is widely used in packaging materials, household goods, and building materials.
- The chemical formula for PE is...-CH2-CH2-...It is a polymer material in which ethylene units are repeated.
- The molecular structure of PE may be linear according to the polymerization method or may take the form of a branched polymer.
Depending on the density of the polymer, it may be classified into high density PE (HDPE), linear low density PE (LLDPE), and low density PE (LDPE).
- It is divided into HDPE［high density polyethylene ］ ⇒ (high density polyethylene=hard polyethylene) and LDPE［ low density polyethylene ］⇒(low density polyethylene=soft polyethylene)
- conform to the Food Sanitation Act. It has excellent physical properties even under low temperatures.

2. Purpose
1) HD-PE (High density polyethylene) : Shampoo container, kerosene can, detergent container, city gas pipe, water pipe, Fishing boat ropes, fishing nets, beer containers, motorcycle , etc
2) LD-PE (Low density polyethylene) : Food packaging, garbage bag, agricultural film, mayonnaise/ketchup container, agricultural pipe, bottle cap, food seal container, internal cladding, etc.

PES(聚醚砜)

It sinks into the water at a high density (1.37). Since it is an amorphous resin, a transparent molded article, a light yellow color, is obtained.
The molded article is strong and has a very high softening point, and has a Vicart softening point higher than 220°C.
When placed in a flame, the molded product does not burn easily, but when burned, the molded product burns while emitting a white flame to emit the smell of sulfur.
When a molded article hits a solid one, it makes a metal or a bell sound.

PET (PolyEthylene Terephthalate)

It is optimal for parts requiring fixed density .It has high mechanical strength and dimensional stability, and excellent wear resistance. It is a high-performance plastic with numerous characteristics and already has a lot of experience in the machinery parts field overseas.

1. characteristic
1) Continuous use temperature=80℃
2) Magnetic stress : It has high compressive strength and excellent creep resistance.
3) Dimensional Stability: Low absorption, small linear expansion coefficient.
4) Friction and abrasion characteristics : Low coefficient of friction, stable/excellent Wear resistance.
5) Electrical properties : High withstand voltage
6) Acid resistance : Do not use it for alkali.

2. Purpose
- food processing machine
- Packing machine
- the field of electricity and electronics

PP(Polypropylene)

1. Method of distinguishing
- Float in water with a density of 0.9g/㎠. During combustion, it burns easily with a blue flame with yellow at the tip. And it smells like candles when it burns. Stay away from the flame and it will continue to keep burning. Although there is little smoke generation, the molded parts are hard and have a candle-like texture. It doesn't break easily unless you cut it.

2. characteristic
- It has the smallest specific gravity among plastics
The properties of PP (polypropylene) are similar to those of PE (polyethylene), but the like is superior to those of PE (polyethylene).

PA(nylon)

PA6 is less dense than PA66. (1.15g/㎠ 1.13g/㎠).
So everything sinks into the water. In addition, it is opaque and rigid, so it is easily cut as a hard material, resulting in a natural terminal cutting hole.
It is difficult to ignite and once burned, it loses its self-extinguishing properties.
The flame burns blue, and the area around it is yellow, giving off the smell of hair burning hair.

PEEK(polyether · ether · ketone)

PEEK has the highest heat resistance (continuous use temperature of 250°C) among crystalline resins that can be dissolved and molded. Mechanical properties are extremely strong materials with high elongation and excellent impact resistance along with rigidity.

characteristic
- Continuous use temperature= 250℃
- It is suitable for continuous use under high temperature.
- exceptionally good chemical resistance. - Excellent mechanical properties over a wide range of temperatures.
- Excellent electrical features, weather resistance.

HDPE(High Density Polyethylene)

High-density polyethylene (HDPE, LUTENE-H) produced by LG Chem is produced by the world's first commercialized low-pressure manufacturing method by Hoechst.
In addition, it provides production technology to the U.S., Japan, and other countries, and is widely recognized around the world for its excellent processability, excellent quality, and advanced products due to its constant R&D results.
LG Chem's high density polyethylene is a shock-resistant and high-rigid product with excellent chemical resistance, environmental stress cracking (ESCR), and electrical characteristics, so it is used for various purposes such as film, hollow molding, injection, and pipe.
In addition, it succeeded in commercializing metallocene polyethylene (mPE), the next-generation polyethylene, for the first time in Korea, and was recognized for its world-class technology by making its own catalyst and using the existing HDPE Line.

EVA(ethylene-vinylalcohol copolymer)

The resin obtained by saponifying the ethylene-vinyl acetate copolymer has a hydroxyl group in the molecule, and this is a factor characterizing the properties of the resin.
It also has excellent organic solvent properties.

PP(polypropylene)

Polymers obtained by polymerizing propylene have a molecular weight of about 40,000 or more and are commercially available, have a density of 0.90, and are relatively excellent in tensile strength and heat resistance. Most of the properties are similar to those of polyethylene, but it resists stress cracks well and has excellent transparency. Materials copolymerized with other monomers, blended with polyisobutylene, etc., and materials containing asbestos or glass fiber to improve impact resistance are also commercially available, and are used for industrial use of automobile parts, various containers, films, etc. .

PC(polycarbonate)

1. method of distinguishing
- It has a density of 1.2g/cm2 and sinks in water. It burns with a blue flame, but it doesn't burn easily. And the molding is carbonized and soon foamed. If the flame is removed, the combustion will not continue. And it produces a slight smell of phenol.
- It has excellent electrical properties, so it does not change by temperature and frequency, and is not affected by moisture because of its low absorption rate. Scientific properties are stable in alcohol, oil, weak acids, etc.

2. characteristic
1) Impact Resistance, : More than 250 times the impact strength of ordinary glass.
2) Dimensional Stability : Be hardly affected by temperature or moisture.
3) Weather Resistance : Excellent ultraviolet resistance keeps high physical properties for a long time.
4) Excellent electrical properties over a wide temperature range.
5) Since electrical properties do not change over a wide temperature range, they are excellent as insulating materials.

3. Purpose
- Communication, information, and OA devices (cell phones, copier parts)
- Precision instruments (camera parts, wristwatch internal instrument parts)
- Optical related (compact disc, Optic fiber)
- Sound and home electricity (Iron, CD Player)
- Electronic devices (connectors, fuse tubes, IC trays)
- Automotive (panel, interior lamp, tail lamp)
- Sports (ski goggles, golf club head, karate defense equipment)

ABS resin (acrylonitrile-butadiene-styrene resin)

1. method of distinguishing
- It is cut cleanly with a knife, and the cut surface is smooth
When burned, yellow charcoal produces a lot of sparks and emits an acidic smell that smells like rubber.
It has a density of 1.05g/㎠and sinks slowly in the water.
- ABS is an amorphous styrene-based thermoplastic resin with excellent balance such as impact resistance, rigidity, and flow, and is also characterized by excellent dimensional stability and molding processability.
- The ABS resin has excellent impact resistance over a wide temperature range and also has excellent tensile strength, rigidity, and heat resistance.
In addition, due to its excellent electrical properties, oil resistance, chemical resistance, and contamination resistance, all molding methods such as injection, extrusion, and calender processing are applied, and molding shrinkage is small.
- The molded product has beautiful gloss, excellent dimensional stability, and creep resistance. In addition, secondary processing such as vacuum molding, painting, and metal plating is also easy.

2. characteristic
- It has excellent shock resistance and rigidity
- The secondary processing is easy.
- Easy processing such as cutting and drilling.
- Easy to attach tapping, insert, glue, etc.
- It has a good surface appearance.
- Acrylic: Excellent mechanical performance and heat resistance.
- Since it is a rubber component, it has excellent impact resistance.
- Stylene : Its formability and electrical properties are also excellent.

3. Purpose
1) Miscellaneous goods: stationery, toys, tableware, toilet, etc.,
2) Interior ·exterior
3) Others: suit case, briefcase, sports equipment, furniture, musical instruments, etc

PPS

The molded product has a density of 1.5 ~ 2.1 g/㎠, which is greater than 1g/㎠, so it sinks quickly in water.
High density materials contain mineral fillers in glass fibers.
The molded article is rigid and does not cut easily with a knife. In addition, since this resin has its own non-combustibility, it does not burn well.
It needs to reach a temperature of 540°C to light the molded product. When heated in a strong flame, it carbonizes and swells up with a smell of sulfur.

By Product > GT > Rubber recycling에 속한 제품리스트
Name	Description
Unvulcanized rubber (also known as uncured rubber)	Uncured rubber is our core business. Tire manufacturers are using uncured rubber as a main raw material. Each production batch has left overs. Hankook TRS collects these left overs and export them overseas. Our uncured rubbers are classified according to form and grade. 1) Unvulcanized rubber sheet compound 2) Unvulcanized rubber G77 (manufactured for racing car tires) 3) Unvulcanized rubber in noodles form
Nylon friction rubber	If you are looking for a way to reduce your cost of goods, nylon friction rubber is the solution to your problem. This product contains uncured rubber and nylon cord. It’s a versatile material that can be used to produce different items such as car stoppers, rubber parts for industrial machines, floorings, conveyer belts…
Reclaimed EPDM 60-1	Reclaimed EPDM exclusively made with EPDM weather stripes used by the automotive industry. This 100% uncured material is offering a high weather resistance.

By Product > GT > Rubber recycling에 속한 제품리스트

Name

Description

Unvulcanized rubber (also known as uncured rubber)

Uncured rubber is our core business. Tire manufacturers are using uncured rubber as a main raw material. Each production batch has left overs. Hankook TRS collects these left overs and export them overseas. Our uncured rubbers are classified according to form and grade.

1) Unvulcanized rubber sheet compound
2) Unvulcanized rubber G77 (manufactured for racing car tires)
3) Unvulcanized rubber in noodles form

Nylon friction rubber

If you are looking for a way to reduce your cost of goods, nylon friction rubber is the solution to your problem. This product contains uncured rubber and nylon cord. It’s a versatile material that can be used to produce different items such as car stoppers, rubber parts for industrial machines, floorings, conveyer belts…

Reclaimed EPDM 60-1

Reclaimed EPDM exclusively made with EPDM weather stripes used by the automotive industry. This 100% uncured material is offering a high weather resistance.

By Product > GT > Reclaimed EPDM에 속한 제품리스트
Name	Description
Reclaimed EPDM	Our EPDM collects high-quality magnetic magnifying glass weatherstrip, undergo desulfurization, and regenerates it back to the seat state and provides it to domestic and foreign customers. It has excellent quality and high durability. Raw material costs can be reduced by mixing Reclaimed EPDM and new EPDM. Application: Conveyor belt vehicle support, waterproof rubber products, weather strip, castopper, floor material, sealing, solid tire

By Product > GT > Reclaimed EPDM에 속한 제품리스트

Name

Description

Reclaimed EPDM

Our EPDM collects high-quality magnetic magnifying glass weatherstrip, undergo desulfurization, and regenerates it back to the seat state and provides it to domestic and foreign customers. It has excellent quality and high durability.
Raw material costs can be reduced by mixing Reclaimed EPDM and new EPDM.

Application: Conveyor belt vehicle support, waterproof rubber products, weather strip, castopper, floor material, sealing, solid tire

By Product > GT > Carrier에 속한 제품리스트
Name	Description
For lightweight	- Using polyurethane wheels - Galvanized caster for lightweight - Increased rotational power by using ball bearings
For lightweight bolts	- Using polyurethane wheels - Galvanized caster for lightweight - Increased rotational power by using ball bearings - Bolt-type multipurpose caster
For heavy loads (PHENOL, PVC)	Phenol - Use 4 inch 5 inch 6 inch phenol wheels - Galvanized caster for heavy load - Installation of the rotating grease filler (Nipple) PVC - 6 inch (152 mm) PP wheel used - Use Ball Bearing to increase rotational power - Installation of the rotating grease filler (Nipple)
General for heavy loads	- Use of cast urethane wheels - Galvanized caster for heavy load - Use Roller/Ball Bearing to increase rotational power - Installation of the rotating grease filler (Nipple)
Wide Width for Heavy Load (51mm)	- Using polyurethane (PU) wheels - Galvanized caster for heavy load - Increased rotational power by using ball bearings
Gray Rubber Wheel for Heavy Load	- Using Gray Rubber Wheels - Galvanized caster for heavy load - Increased rotational power by using ball bearings - Installation of the rotating grease filler (Nipple)
Air Wheel for Heavy Load	- Using 16 inch(140mm) air wheels - Using 18 inch (450mm) light aircraft wheels - Strong durability and high load forging - Installation of the rotating grease filler (Nipple)
Forging (for high load) 3, 4, 5INCH	- Use of cast urethane (PU) wheels - Strong durability and high load forging - Use Roller/Ball Bearing to increase rotational power - Installation of the rotating grease filler (Nipple)
Pallet wheels for high-load	- Use of cast urethane wheels - Low-height high-load forging - Use Roller/Ball Bearing to increase rotational power - Installation of the rotating grease filler (Nipple) - All products can be equipped with special brakes
Forging (for high load) 6, 8, 10, 12, 14, 16INCH	- Use of cast urethane (PU) wheels - Strong durability and high load forging - Use Roller/Ball Bearing to increase rotational power - Installation of the rotating grease filler (Nipple) - All products can be equipped with special brakes
Ultra-weight (for ultra-high load)	- 120/150 Use of large urethane wheels - Adopting 25mm thick ultra-precise movable top plate - Precision Welded Products for Ultra High Loads - 6206 Drive Flexible with Bearing - Installation of the rotating grease filler (Nipple) - All products can be equipped with special brakes
Dovacaster	- Using Polyurethane Pallets Wheels - Carrying handle mountable (purchased separately) - FIXING & ROTATING (Circular plate attached on top) - 2, 4, 6, 9, 12, 16 piece Installation - 4pieces of 6204 ball bearing installed per wheel - Wheels (nylon, cast urethane) can be selected and installed. - The nylon wheel is a new type of wheel developed to complement the shortcomings of the cast urethane wheel. - It does not press like a urethane wheel, and it rolls better than when loading high loads and supports high loads.
Rolltainer	- Easy to use and easy to use even for beginners, so work is efficient. Foldable for easy storage. - Lower labor costs and ease of use in small areas. - Size : General, Large, Extra Large, 2 door type, 4 door type etc.,
Mesh pallet	- Made to load and store items securely and conveniently by surrounding a grid-shaped mesh on a steel pallet - It can be stacked in 2nd and 3rd layers for loading and storage. - 6-inch weight wheel mountable - Size: Mini, General, Extra Large
A hand pallet	- Oil pump body made by casting and machining - Separate oil reservoir, oil leak prevention device. - Perfectly sealed pump prevents dirt, dust, and moisture from entering. - Rotation angle 18-~210 degrees. - Rugged pumps and steering wheels reduce force when transported, making operation smooth - Rubber on the handle - A/S available

By Product > GT > Carrier에 속한 제품리스트

Name

Description

For lightweight

- Using polyurethane wheels
- Galvanized caster for lightweight
- Increased rotational power by using ball bearings

For lightweight bolts

- Using polyurethane wheels
- Galvanized caster for lightweight
- Increased rotational power by using ball bearings
- Bolt-type multipurpose caster

For heavy loads (PHENOL, PVC)

Phenol
- Use 4 inch 5 inch 6 inch phenol wheels
- Galvanized caster for heavy load
- Installation of the rotating grease filler (Nipple)

PVC
- 6 inch (152 mm) PP wheel used
- Use Ball Bearing to increase rotational power
- Installation of the rotating grease filler (Nipple)

General for heavy loads

- Use of cast urethane wheels
- Galvanized caster for heavy load
- Use Roller/Ball Bearing to increase rotational power
- Installation of the rotating grease filler (Nipple)

Wide Width for Heavy Load (51mm)

- Using polyurethane (PU) wheels
- Galvanized caster for heavy load
- Increased rotational power by using ball bearings

Gray Rubber Wheel for Heavy Load

- Using Gray Rubber Wheels
- Galvanized caster for heavy load
- Increased rotational power by using ball bearings
- Installation of the rotating grease filler (Nipple)

Air Wheel for Heavy Load

- Using 16 inch(140mm) air wheels
- Using 18 inch (450mm) light aircraft wheels
- Strong durability and high load forging
- Installation of the rotating grease filler (Nipple)

Forging (for high load) 3, 4, 5INCH

- Use of cast urethane (PU) wheels
- Strong durability and high load forging
- Use Roller/Ball Bearing to increase rotational power
- Installation of the rotating grease filler (Nipple)

Pallet wheels for high-load

- Use of cast urethane wheels
- Low-height high-load forging
- Use Roller/Ball Bearing to increase rotational power
- Installation of the rotating grease filler (Nipple)
- All products can be equipped with special brakes

Forging (for high load) 6, 8, 10, 12, 14, 16INCH

- Use of cast urethane (PU) wheels
- Strong durability and high load forging
- Use Roller/Ball Bearing to increase rotational power
- Installation of the rotating grease filler (Nipple)
- All products can be equipped with special brakes

Ultra-weight (for ultra-high load)

- 120/150 Use of large urethane wheels
- Adopting 25mm thick ultra-precise movable top plate
- Precision Welded Products for Ultra High Loads
- 6206 Drive Flexible with Bearing
- Installation of the rotating grease filler (Nipple)
- All products can be equipped with special brakes

Dovacaster

- Using Polyurethane Pallets Wheels
- Carrying handle mountable (purchased separately)
- FIXING & ROTATING (Circular plate attached on top)
- 2, 4, 6, 9, 12, 16 piece Installation
- 4pieces of 6204 ball bearing installed per wheel
- Wheels (nylon, cast urethane) can be selected and installed.
- The nylon wheel is a new type of wheel developed to complement the shortcomings of the cast urethane wheel.
- It does not press like a urethane wheel, and it rolls better than when loading high loads and supports high loads.

Rolltainer

- Easy to use and easy to use even for beginners, so work is efficient. Foldable for easy storage.
- Lower labor costs and ease of use in small areas.
- Size : General, Large, Extra Large, 2 door type, 4 door type etc.,

Mesh pallet

- Made to load and store items securely and conveniently by surrounding a grid-shaped mesh on a steel pallet
- It can be stacked in 2nd and 3rd layers for loading and storage.
- 6-inch weight wheel mountable
- Size: Mini, General, Extra Large

A hand pallet

- Oil pump body made by casting and machining
- Separate oil reservoir, oil leak prevention device.
- Perfectly sealed pump prevents dirt, dust, and moisture from entering.
- Rotation angle 18-~210 degrees.
- Rugged pumps and steering wheels reduce force when transported, making operation smooth
- Rubber on the handle
- A/S available

ENG

KOREAN

ENGLISH

CHINISE

JAPANSE

GT

By Product > GT > Plastic (19)

By Product > GT > Rubber recycling (3)

By Product > GT > Reclaimed EPDM (1)

By Product > GT > Carrier (15)

ENG KOREAN ENGLISH CHINISE JAPANSE

GT

By Product > GT > Plastic (19)

By Product > GT > Rubber recycling (3)

By Product > GT > Reclaimed EPDM (1)

By Product > GT > Carrier (15)

ENG

KOREAN

ENGLISH

CHINISE

JAPANSE